Sata Drive Boot Stop error 0x00000024 with 2nd sata drive attached

04-18-07, 07:15 PM

Marc Seidler

I have a client with a non booting Sata Drive Dell system. If amd trying to
recover the data. I installed the drive in a 2nd good system and whether I
boot normally or with the drive disconnected until it is up and running thr
system crashes almost immediately with a stop 0X00000024 error ntfs.sys.

04-18-07, 07:58 PM

Newbie Coder

Marc,

http://www.updatexp.com/stop-messages.html

This article is about 2000 but gives you useful help too

http://support.microsoft.com/default...;en-us;Q228888

04-18-07, 08:14 PM

Anna

"Marc Seidler" <marcseidler> wrote in message
news:921b
>I have a client with a non booting Sata Drive Dell system. If amd trying
>to recover the data. I installed the drive in a 2nd good system and whether
>I boot normally or with the drive disconnected until it is up and running
>thr system crashes almost immediately with a stop 0X00000024 error
>ntfs.sys.
>
> --
> Marc H. Seidler
> The Computer Doctors
> [..]
> marcseidler
> seidler
> 410-840-3434

Marc:
If your primary or exclusive interest at this point is to access the HDD to
copy whatever data you can, you might want to install the drive in a USB or
Firewire external enclosure and see if you can get at it that way.

If you can access the drive that way, then after copying whatever data you
able to, run the chkdsk command and see if that's of any use.

I assume you've checked out the disk with a diagnostic utility from the
manufacturer of the disk, yes?
Anna

Similar Threads
Sata 2 / Sata II drive vanishes after format on 939 dual VSTA I installed a Maxtor Diamond Max10 160GB Sata 2 drive to my system. My other drives are a PATA 120GB HD and PATA Sony DVDRW MB ASRock 939 dual VSTA AMD 64 3000+ 1GB RAM ATI...
Dual Boot one C Drive Sata E drive IDE Ok here is my question. Im not a tech guy so I dont want to do this if its not going to work. My main C drive is a Sata drive and My E drive is an IDE drive. I wanted to load...
Dual Boot one C Drive Sata E drive IDE Ok here is my question. Im not a tech guy so I dont want to do this if its not going to work. My main C drive is a Sata drive and My E drive is an IDE drive. I wanted to load...
Problems getting FBA to boot to a SATA drive. Stop error After I build my image, I then copy the run time image to a second HD witch is SATA (So is the HD with TA). When I try to boot of that hard drive to let FBA run, I get a...
Making a SATA drive the boot drive I have a new ASUS A7N8X-E with a SATA controller on board, and a new WD SATA drive, and am finding it impossible to make it the boot disk. XP SP2 will recognize the disk as...